Installing ATF Pan
WARNING: This page is about a different car, the 2014 Porsche Cayenne, 2013 Porsche Cayenne, 2012 Porsche Cayenne, and 2011 Porsche Cayenne. However, it is still accessible from the selected car via links, so may be relevant.
- Clean all magnets in the ATF pan. Make sure to stick the magnets back on fully.
- Fit ATF pan with new gasket -1-
. When doing this, check that all spacer sleeves -2-
are inserted fully in the new gasket.
ATF-pan gasket
- Tighten screws on the ATF pan in several stages and in diagonally opposite sequence.
> Tightening torque 8 (6 ftlb.) Nm +/- 1 (0.5 ftlb.) Nm
- Install overflow pipe -C-
.
> Tightening torque 2 (1.5 ftlb.) Nm
- Screw in oil drain plug -A-
with a new sealing ring -B-
.
> Tightening torque 20 (15 ftlb.) Nm + 2 (1.5 ftlb.) Nm
Overflow pipe on ATF pan