LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2017 >> Cayenne Turbo >> Repair and Diagnosis >> External Pages >> Different car >> Section 80 (37 - Automatic Transmission - Actuator, Housing (4.8L Non Turbo) -- 92A - Cayenne (92A)) >> WM, 373119 Removing And Installing Multi-Functional Switch >> Installing Multi-Functional Switch

Installing Multi-Functional Switch

WARNING: This page is about a different car, the 2014 Porsche Cayenne, 2013 Porsche Cayenne, 2012 Porsche Cayenne, and 2011 Porsche Cayenne. However, it is still accessible from the selected car via links, so may be relevant.
G16317495Courtesy of PORSCHE CARS NORTH AMERICA, INC.

Overview of multi-functional switch

  1. Put multi-functional switch on the selector shaft.
  2. Adjust multi-functional switch.

    > 373115 ADJUSTING MULTI-FUNCTIONAL SWITCH 

  3. Position cable on multi-functional switch.
  4. Install heat shield on the transmission. To do this, screw in three fastening screws -arrow-  .

    > Tightening torque 10 (7.5 ftlb.) Nm

    G16317496Courtesy of PORSCHE CARS NORTH AMERICA, INC.

    Heat shield to right side of transmission

  5. Functional test of gear selecting system:
    • Will the vehicle start?
    • Do all the selector-lever positions work?
scientia non olet · About LEMON Manuals