LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2017 >> Cayenne Turbo >> Repair and Diagnosis >> External Pages >> Different car >> Section 80 (37 - Automatic Transmission - Actuator, Housing (4.8L Non Turbo) -- 92A - Cayenne (92A)) >> WM, 373019 Removing And Installing Transmission Control Unit >> Subsequent Work

Subsequent Work

WARNING: This page is about a different car, the 2014 Porsche Cayenne, 2013 Porsche Cayenne, 2012 Porsche Cayenne, and 2011 Porsche Cayenne. However, it is still accessible from the selected car via links, so may be relevant.
  1. Install control unit for rear-differential lock.

    > 397519 Removing and installing control unit for rear-differential lock - section on  "INSTALLING "

  2. Install inner door entry guard on the right.

    > WM 680519 REMOVING AND INSTALLING INNER DOOR ENTRY GUARD (CAYENNE, CAYENNE GTS, CAYENNE TURBO S, CAYENNE S, CAYENNE S E-HYBRID, CAYENNE TURBO, CAYENNE S DIESEL, CAYENNE (3.0)) "Installing"

  3. Install right front seat.

    > WM 720119 REMOVING AND INSTALLING FRONT SEAT (CAYENNE, CAYENNE GTS, CAYENNE TURBO S, CAYENNE S, CAYENNE S E-HYBRID, CAYENNE TURBO, CAYENNE S DIESEL, CAYENNE (3.0)) "Installing"

  4. If the control unit was replaced, the "new" control unit must be adapted to suit the vehicle using > 9818 - PIWIS Tester 11.