LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2017 >> Cayenne Turbo >> Repair and Diagnosis >> External Pages >> Different car >> Section 80 (37 - Automatic Transmission - Actuator, Housing (4.8L Non Turbo) -- 92A - Cayenne (92A)) >> WM, 370819 Removing And Installing Selector Support >> Subsequent Work

Subsequent Work

WARNING: This page is about a different car, the 2014 Porsche Cayenne, 2013 Porsche Cayenne, 2012 Porsche Cayenne, and 2011 Porsche Cayenne. However, it is still accessible from the selected car via links, so may be relevant.
  1. Adjust selector lever cable.

    > 371515 ADJUSTING SELECTOR LEVER CABLE 

  2. Install switch console.

    >WM 962719 REMOVING AND INSTALLING SWITCH CONSOLE (CAYENNE, CAYENNE GTS, CAYENNE TURBO S, CAYENNE S, CAYENNE S HYBRID, CAYENNE TURBO, CAYENNE S DIESEL, CAYENNE (3.0))

  3. Install selector knob.

    > 370419 REMOVING AND INSTALLING SELECTOR KNOB 

  4. Install centre console cover at the top and bottom.

    > WM 681919 REMOVING AND INSTALLING CENTRE CONSOLE COVER (CAYENNE, CAYENNE GTS, CAYENNE TURBO S, CAYENNE S, CAYENNE S E-HYBRID, CAYENNE TURBO, CAYENNE S DIESEL, CAYENNE (3.0))

  5. Install PCM 3.1 display and operator control unit.

    > WM 911019 REMOVING AND INSTALLING PCM DISPLAY AND OPERATOR CONTROL UNIT (CAYENNE, CAYENNE GTS, CAYENNE TURBO S, CAYENNE S HYBRID, CAYENNE S E, CAYENNE TURBO, CAYENNE S DIESEL, CAYENNE (3.0))

  6. Install centre air vents at the left and right.

    > WM 855319 REMOVING AND INSTALLING CENTRE AIR NOZZLE (CAYENNE, CAYENNE GTS, CAYENNE TURBO S, CAYENNE S, CAYENNE S E-HYBRID, CAYENNE TURBO, CAYENNE S DIESEL, CAYENNE (3.0))

scientia non olet · About LEMON Manuals