Intake Module On Naturally Aspirated Engine
WARNING: This page is about a different car, the 2014 Porsche Cayenne, 2013 Porsche Cayenne, 2012 Porsche Cayenne, and 2011 Porsche Cayenne. However, it is still accessible from the selected car via links, so may be relevant.
Intake module on naturally aspirated engine
TIGHTENING TORQUE SPECIFICATIONS
| 1 | Intake module |
| 2 | Decoupling module (fastening part): observe tightening sequence > Tightening torque 15 (1 ftlb.) Nm -- dang -- |
| 3 | Screw. 5 x 16 > Tightening torque 4 (3 ftlb.) Nm -- dang -- and > Tightening torque 4 (3 ftlb.) Nm -- dang -- |
| 4 | Pressure sensor |
| 5 | Intake module seal; check that seal is aligned and fitted correctly! |
| 6 | Heat socket |
| 7 | Screw. 6 x 50 > Tightening torque 7 (5 ftlb.) Nm -- dang -- |
| 8 | Electronic accelerator |
| 9 | Seal |
| 10 | Ball socket |