Turbocharger Oil Circuit, Cylinders 5 To 8
WARNING: This page is about a different car, the 2014 Porsche Cayenne, 2013 Porsche Cayenne, 2012 Porsche Cayenne, and 2011 Porsche Cayenne. However, it is still accessible from the selected car via links, so may be relevant.
Turbocharger oil circuit, cylinders 5 to 8
TIGHTENING TORQUE SPECIFICATIONS
| 1 | Oil supply line for turbocharger, cylinders 5 to 8 |
| 2 | Nut. M6 > Tightening torque 6.5 (5 ftlb.) Nm -- dang -- |
| 3 | Holding clamp |
| 4 | Vent line on turbocharger for cylinders 5 to 8 > Tightening torque 10 (7.5 ftlb.) Nm -- dang -- |
| 5 | Holding clamp |
| 6 | Screw. M6 x 12: turbocharger oil feed line holder to lower part of crankcase > Tightening torque 10 (7.5 ftlb.) Nm -- dang -- : holding clamo for oil feed line to holder > Tightening torque 10 (7.5 ftlb.) Nm -- dang -- |
| 7 | Screw. M6 x 16 > Tightening torque 10 (7.5 ftlb.) Nm -- dang -- |
| 8 | Oil extraction line |
| 9 | Turbocharger seal, cylinders 5 to 8 |
| 10 | Sealing ring |
| 11 | Connection piece > Tightening torque 45 (33 ftlb.) Nm -- dang -- |
| 12 | Clamp |
| 13 | Holder for oil supply line |