LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2017 >> Cayenne Turbo >> Repair and Diagnosis >> External Pages >> Different car >> Section 76 (27 - Starter, Power Supply, Cruise Control (4.8L Non Turbo) -- 92A - Cayenne (92A)) >> WM, 278515 Calibrating Control Unit For Distance Measuring Sensor >> Adjusting Control Unit For Distance Measuring Sensor

Adjusting Control Unit For Distance Measuring Sensor

WARNING: This page is about a different car, the 2014 Porsche Cayenne, 2013 Porsche Cayenne, 2012 Porsche Cayenne, and 2011 Porsche Cayenne. However, it is still accessible from the selected car via links, so may be relevant.
  1. A battery charger with a current rating of at least 40 A must be connected to the external power feed points.
  2. Connect > 9818 - PIWIS Tester II to the vehicle and start it up.
  3. Switch on ignition.
  4. Select the vehicle and adaptive cruise control  control unit and press >> to continue.
  5. In the Adaptive cruise control  menu select the Maintenance, repairs  submenu and press >> to continue.
  6. Follow the instructions on the Tester and, if necessary, adjust the sensor -1-  using the adjusting tool > VAS 6190/2 - T-bar Setting Tool for ACC Sensor  in line with the Tester specifications.
    G16310811Courtesy of PORSCHE CARS NORTH AMERICA, INC.

    Adjusting screws for distance measuring sensor

  7. The process must be repeated until the message Adjustment successful  is displayed on the Tester.
scientia non olet · About LEMON Manuals