LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2017 >> Cayenne Turbo >> Repair and Diagnosis >> External Pages >> Different car >> Section 75 (26 - Exhaust System (4.8L Non Turbo) -- 92A - Cayenne (92A)) >> WM, 260119 Removing And Installing Exhaust System >> Removing Exhaust System

Removing Exhaust System

WARNING: This page is about a different car, the 2014 Porsche Cayenne, 2013 Porsche Cayenne, 2012 Porsche Cayenne, and 2011 Porsche Cayenne. However, it is still accessible from the selected car via links, so may be relevant.
CAUTION: Hot components 
  • Risk of burns 

    → Let hot components cool down.

    → Wear personal protective gear.

CAUTION: Heavy components 
  • Risk of squashing 

    → Wear personal protective gear.

    → Get someone to help if necessary.

Information 

The pictures shown in this document may differ from the original.

  1. Loosen fastening nuts -8-  on the exhaust clamp (clamping sleeve) -3-  between the catalytic converter and exhaust system. Slide exhaust clamps onto the exhaust system. Exhaust clamps must not be re-used.
    G16310564Courtesy of PORSCHE CARS NORTH AMERICA, INC.

    Loosening clamp

  2. Get another person to help secure the exhaust system.
  3. Unscrew fastening screw -6-  on the centre bracket -4-  .
    G16310565Courtesy of PORSCHE CARS NORTH AMERICA, INC.

    Loosening centre bracket

    Unscrew four fastening screws -7-  from the brackets on the rear silencer -5-  .

    G16310566Courtesy of PORSCHE CARS NORTH AMERICA, INC.

    Removing bracket on rear silencer

  4. Get another person to help you remove the exhaust system.