LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2017 >> Cayenne Turbo >> Repair and Diagnosis >> External Pages >> Different car >> Section 73 (20 - Fuel Supply, Actuator (4.8L Non Turbo) -- 92A - Cayenne (92A)) >> WM, 205019 Removing And Installing Sucking Jet Pump >> Removing Sucking Jet Pump

Removing Sucking Jet Pump

WARNING: This page is about a different car, the 2014 Porsche Cayenne, 2013 Porsche Cayenne, 2012 Porsche Cayenne, and 2011 Porsche Cayenne. However, it is still accessible from the selected car via links, so may be relevant.
  1. Disconnect the sucking jet pump at the fuel pump. To do this, press on the left and right -arrows-  and pull off the connections -1 and 2-  .
    G16310136Courtesy of PORSCHE CARS NORTH AMERICA, INC.

    Sucking jet pump connections at the fuel pump

  2. Release connection -3-  and unclip it -a-  .
  3. Release the sucking jet pump -1-  from the bracket -2-  on the fuel tank floor at the right -arrow-  and unclip it.
    G16310137Courtesy of PORSCHE CARS NORTH AMERICA, INC.

    Unclipping sucking jet pump

  4. Remove the sucking jet pump through the opening in the left connection unit.
G16310138Courtesy of PORSCHE CARS NORTH AMERICA, INC.

Removing sucking jet pump

scientia non olet · About LEMON Manuals