LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2017 >> Cayenne Turbo >> Repair and Diagnosis >> External Pages >> Different car >> Section 73 (20 - Fuel Supply, Actuator (4.8L Non Turbo) -- 92A - Cayenne (92A)) >> WM, 203819 Removing And Installing Fuel Supply Line >> Preliminary Work

Preliminary Work

WARNING: This page is about a different car, the 2014 Porsche Cayenne, 2013 Porsche Cayenne, 2012 Porsche Cayenne, and 2011 Porsche Cayenne. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove engine.

    > 100119 Removing and installing engine -  "REMOVING "

  2. Remove rear cardan shaft.

    > 393519 Removing and installing rear cardan shaft -  "REMOVING "

  3. Remove rear right wheel housing liner.

    > WM 536919 REMOVING AND INSTALLING REAR WHEEL HOUSING LINER "Removing"

  4. Detach carbon canister with degassing tank and filler neck.

    > 202519 Removing and installing carbon canister -  "REMOVING "

    > 201019 Removing and installing fuel tank -  "REMOVING "

  5. Open the filler flap.
  6. Remove rear seat.

    > WM 724819 REMOVING AND INSTALLING 2/3-SPLIT FOLDING REAR SEAT (EXCEPT CAYENNE, CAYENNE GTS, CAYENNE TURBO S, CAYENNE S, CAYENNE S E-HYBRID, CAYENNE TURBO, CAYENNE S DIESEL, CAYENNE (3.0)) "Removing"

scientia non olet · About LEMON Manuals