LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2017 >> Cayenne Turbo >> Repair and Diagnosis >> External Pages >> Different car >> Section 73 (20 - Fuel Supply, Actuator (4.8L Non Turbo) -- 92A - Cayenne (92A)) >> WM, 202319 Removing And Installing Tank Vent Valve >> Preliminary Work

Preliminary Work

WARNING: This page is about a different car, the 2014 Porsche Cayenne, 2013 Porsche Cayenne, 2012 Porsche Cayenne, and 2011 Porsche Cayenne. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove design cover at the right (under the upper torque support).

    > 108319 REMOVING AND INSTALLING ENGINE COVER (DESIGN COVER)

  2. Pull design cover off the throttle valve.
  3. Remove Y-shaped pipe ahead of the throttle valve.

    > WM, 243519 REMOVING AND INSTALLING COWL FOR THROTTLE HOUSING (Y-PIPE)

scientia non olet · About LEMON Manuals