TEQ, 2005 Fuel Tank Cap In Aluminum Look: Parts
WARNING: This page is about a different car, the 2014 Porsche Cayenne, 2013 Porsche Cayenne, 2012 Porsche Cayenne, and 2011 Porsche Cayenne. However, it is still accessible from the selected car via links, so may be relevant.
| Part number | Des... | Addition/Scope | Quantity |
|---|---|---|---|
| > 00004400191 | Fuel tank cap in Aluminum Look, set | ||
| > 00004400191 | Fuel tank cap in Aluminum Look, only for Cayenne S EHybrid, set |
Model year
From 2011
Revision:
This bulletin replaces bulletin Group 2, #52/12, dated November 26, 2014.
Concern:
Retrofitting
Restriction:
Not for order type 92AAY1 (Cayenne Diesel) in the markets USA (C02) and Canada (C36).
NOTE:
A fuel tank cap ("Fuel tank cap in Aluminum Look" in the Tequipment Catalog) is available for the Cayenne.
Parts Info:
| 000.044.001.91 | > Fuel tank cap in Aluminum Look, set |
| 000.044.001.92 | > Fuel tank cap in Aluminum Look, only for Cayenne S E-Hybrid, set |
Parts List:
| - - - | 1 x | Fuel tank cap -1- |
| - - - | 1 x | Retaining strap for Panamera -2- |
| - - - | 1 x | Retaining strap for Cayenne -3- |
| 7P5.010.869.D | 1 x | Sticker (warning note) -4- |
| - - - | 1 x | Retaining strap for Sports Car, Macan -5- |
Materials:
| - - - | - - | Isopropanol (commercially available) |
| - - - | - - | Cleaning cloth (commercially available) |
Work Procedure:
- The retaining straps are differentiated based on their geometric shape and the part number on the retaining strap.
A 911, Boxster, Macan (circular) B Panamera (square) C Cayenne (teardrop shape) Arrow Sports Cars: 991..., Cayenne: 7L5..., Panamera: none - Fit retaining strap on new fuel tank cap.
- 2.1 Fit retaining strap -1- into the groove as shown -arrow a- .
- 2.2
Press retaining strap into the groove with your thumb -arrows-
.WARNING: Highly flammable or explosive materials
- Danger of fire or explosion
→ Avoid contact with hot parts or sources of ignition.
→ Use suction to remove ignitable vapors.
→ Attach warning sign in a clearly visible position.
- Danger of fire or explosion
- Remove old fuel tank cap.
- Fit new fuel tank cap on the vehicle.
- 4.1 Position small ring -1- on the retaining pivot -2- , pull it down carefully and guide it over the retaining pivot.
- 4.2 Fit new fuel tank cap on the filler neck and screw it on.
- Affix sticker (warning note) -arrow-
to the filler flap.
- 5.1 Clean bonding position with a cleaning cloth and isopropanol to remove any dust and grease.
- 5.2
Affix sticker.
20055500:
Replacing fuel tank cap; Labor time 20 TU
Includes Fitting retaining strap on new fuel tank cap, affixing sticker.