LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2017 >> Cayenne Turbo >> Repair and Diagnosis >> External Pages >> Different car >> Section 70 (15 - Engine - Cylinder Head, Valve Drive (4.8L Non Turbo) -- 92A - Cayenne (92A)) >> WM, 158219 Removing And Installing Cylinder Head Cover >> Subsequent Work

Subsequent Work

WARNING: This page is about a different car, the 2014 Porsche Cayenne, 2013 Porsche Cayenne, 2012 Porsche Cayenne, and 2011 Porsche Cayenne. However, it is still accessible from the selected car via links, so may be relevant.
  1. Install the relevant cross panel at the left or right.

    > WM 508119 REMOVING AND INSTALLING CROSS PANEL "Installing"

  2. Fit bar ignition modules.

    > 282020 Removing and installing bar ignition modules -  "INSTALLING "

  3. Install oil separator.

    > 105519 Removing and installing oil separator -  "INSTALLING "

  4. Install the engine cover.

    > 108319 Removing and installing engine cover (design cover) -  "INSTALLING "

  5. Connect the battery if necessary.
scientia non olet · About LEMON Manuals