LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2017 >> Cayenne Turbo >> Repair and Diagnosis >> External Pages >> Different car >> Section 70 (15 - Engine - Cylinder Head, Valve Drive (4.8L Non Turbo) -- 92A - Cayenne (92A)) >> WM, 157019 Removing And Installing Cylinder Head >> Subsequent Work

Subsequent Work

WARNING: This page is about a different car, the 2014 Porsche Cayenne, 2013 Porsche Cayenne, 2012 Porsche Cayenne, and 2011 Porsche Cayenne. However, it is still accessible from the selected car via links, so may be relevant.
  1. Fit deflector rail.

    > 154719 REMOVING AND INSTALLING GUIDE AND TENSIONING RAILS 

  2. Install camshafts.

    > 150520 REMOVING AND INSTALLING CAMSHAFTS 

  3. Fit timing chain.

    > WM, 153519 REMOVING AND INSTALLING TIMING CHAIN 

  4. Fit chain housing cover.

    > 153319 REMOVING AND INSTALLING CHAIN HOUSING COVER 

  5. Set the timing.

    > WM, 150516 SETTING TIMING 

  6. Fit fuel distributor pipe.

    > 243019 REMOVING AND INSTALLING FUEL DISTRIBUTOR PIPE

  7. Fit intake-air distributor.

    > 244619 REMOVING AND INSTALLING INTAKE-AIR DISTRIBUTOR

  8. Fit the turbocharger on V8 turbo engines.

    > 213019 REMOVING AND INSTALLING TURBOCHARGER

  9. Take the engine from the assembly support and connect it to the transmission.

    > 100127 REMOVING ENGINE FROM TRANSMISSION AND MOUNTING ENGINE ON TRANSMISSION

  10. Install engine.

    > 100119 REMOVING AND INSTALLING ENGINE

scientia non olet · About LEMON Manuals