LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2017 >> Cayenne Turbo >> Repair and Diagnosis >> External Pages >> Different car >> Section 70 (15 - Engine - Cylinder Head, Valve Drive (4.8L Non Turbo) -- 92A - Cayenne (92A)) >> WM, 150520 Removing And Installing Camshafts >> Preliminary Work

Preliminary Work

WARNING: This page is about a different car, the 2014 Porsche Cayenne, 2013 Porsche Cayenne, 2012 Porsche Cayenne, and 2011 Porsche Cayenne. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove valve cover.

    > 158219 REMOVING AND INSTALLING CYLINDER HEAD COVER 

  2. Remove camshaft controller.

    >WM, 158419 REMOVING AND INSTALLING CAMSHAFT ADJUSTERS  - actuator for camshaft (camshaft controller)

  3. Remove camshaft timing gears.

    > 150719 REMOVING AND INSTALLING CAMSHAFT TIMING GEAR 

  4. The high-pressure pump must be removed first before the intake camshaft for cylinder bank 5 to 8 can be removed.

    > 246319 REMOVING AND INSTALLING HIGH-PRESSURE PUMP

    The drive coupling of the high-pressure pump prevents the camshaft from being removed.

scientia non olet · About LEMON Manuals