LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2017 >> Cayenne Turbo >> Repair and Diagnosis >> External Pages >> Different car >> Section 68 (10 - Engine - Crankcase, Suspension (4.8L Non Turbo) -- 92A - Cayenne (92A)) >> WM, 105519 Removing And Installing Oil Separator >> Information >> Removing Oil Separator

Removing Oil Separator

WARNING: This page is about a different car, the 2014 Porsche Cayenne, 2013 Porsche Cayenne, 2012 Porsche Cayenne, and 2011 Porsche Cayenne. However, it is still accessible from the selected car via links, so may be relevant.
  1. Disconnect line connection -1 and 2-  on the connection piece for the oil separator -3-  . Check sealing ring and replace it if necessary.
    G16308286Courtesy of PORSCHE CARS NORTH AMERICA, INC.

    Line connections for oil separator

  2. Unscrew four fastening screws -4-  on the oil separator -3-  .
    G16308287Courtesy of PORSCHE CARS NORTH AMERICA, INC.

    Oil separator

  3. Pull the oil separator -3-  out of the bore on the valve cover -5-  and remove it in an upward direction.
  4. Always replace seals -6-  .
scientia non olet · About LEMON Manuals