Removing Engine Mounting

WARNING: This page is about a different car, the 2014 Porsche Cayenne, 2013 Porsche Cayenne, 2012 Porsche Cayenne, and 2011 Porsche Cayenne. However, it is still accessible from the selected car via links, so may be relevant.

WARNING: Danger of objects or loads falling down

Risk of squashing or crushing

→ Secure components to prevent them from falling down.

Remove the heat shield on the generator for the engine mounting at the right. To do this, unscrew two fastening screws. -right arrows-

Courtesy of PORSCHE CARS NORTH AMERICA, INC.

Heat shields

Fig 1: Right Bracket For Auxiliary Units And Engine Mounting Components Location

Courtesy of PORSCHE CARS NORTH AMERICA, INC.

Right bracket for auxiliary units and engine mounting

1	Bracket for cylinders 1 to 4
2	Screw, M10 x 45
3	Hydraulic mount, right
4	Engine carrier
5	Screw, M10 x 65
6	Nut, M12 x 1.5
7	Bores for screws, M10 x 45
A	Installation view of engine carrier on crankcase

Fig 2: Left Bracket For Auxiliary Units And Engine Mounting Components Location

Courtesy of PORSCHE CARS NORTH AMERICA, INC.

Left bracket for auxiliary units and engine mounting

1	Bracket for auxiliary units/engine mounting
2	Screw, M10 x 45
3	Hydraulic mount, left
4	Engine carrier
5	Screw, M10 x 65
6	Dowel sleeve
7	Nut, M12 x 1.5