Tools And Materials
WARNING: This page is about a different car, the 2014 Porsche Cayenne, 2013 Porsche Cayenne, 2012 Porsche Cayenne, and 2011 Porsche Cayenne. However, it is still accessible from the selected car via links, so may be relevant.
Master Gear unit elevating platform
| 1 | Assembly mandrel => Height can be adjusted; used for mounting in the engine carrier; equipped with a locking screw to prevent engine from tipping and for height adjustment. Item 2 in base carrier |
| 2 | Wheel hub holder => Secures the spring struts to prevent them from tipping. Inserted from the side into the second cross member from the front |
| 3 | Assembly mandrel => Height can be adjusted; used for mounting in the front-axle carrier at the front; equipped with a locking screw to prevent engine from tipping and for height adjustment. Item 1 in base carrier |
| 4 | Support => Not used here. |
| 5 | Wishbone support => Used in conjunction with -5- to protect the wheel suspension and spring struts from damage. |
| 6 | Assembly mandrel => For mounting on the front-axle carrier at the rear. Item 3 in base carrier |
| 7 | Assembly mandrel => Guide for positioning the lifting platform into the body; first moves into a bore in the body for centring roughly. Item 4 in base carrier |
| 8 | Assembly mandrel => For mounting on the transmission cross member. Item 5 on base carrier |
Tool overview
| 1 | Wheel hub holder => Secures the spring struts to prevent them from tipping. |
| 2 | Support => Prevents the engine from tipping backwards. Not generally used. |
| 3 | Lateral mounting mandrel for engine carrier => Height can be adjusted; used for mounting in the engine carrier; equipped with a locking screw to prevent engine from tipping and for height adjustment. Item 2 in base carrier |
| 3.1 | Support with height adjustment => Screwed into part 3. |
| 3.2 | Protection against tipping => Screwed into Part 3.1. Prevents the engine from tilting forward. |
| 4 | Front front-axle carrier mounting => Height can be adjusted; used for mounting in the front-axle carrier at the front; equipped with a locking screw to prevent engine from tipping and for height adjustment. Item 1 in base carrier |
| 4.1 | Support with height adjustment => Screwed into part 4. |
| 5 | Rear front-axle carrier mounting => Item 3 in base carrier |
| 6 | Mounting in the body => Item 4 in base carrier |
| 7 | Mounting for transmission cross member => Item 5 in base carrier |
Old version without retrofit set
Information
For the Cayenne S Diesel (V8), it may be necessary to convert the > VAS 6832/1A - Assembly Fixture - Cayenne! Use
> VAS 6832/2 - Assembly Fixture Supplement Set - Cayenne for this.
Complete structure of the base carrier - old version
| 2, 5 and 8 | Not used for removing engine! |
| 1 | Screw in mounting mandrel for front-axle carrier at the front (instead of "2") |
New version with retrofit set
Information
For the Cayenne S Diesel (V8), it may be necessary to convert the > VAS 6832/1A - Assembly Fixture - Cayenne!
Use
> VAS 6832/2 - Assembly Fixture Supplement Set - Cayenne for this.
Complete setup - scissor-action assembly platform VAS 6832 with assembly device VAS 6832/1A and retrofit set VAS 6832/2
| 1 | Mounting mandrel for front front-axle carrier |
| 2 | Mounting mandrel for engine carrier |
| 3 | Mounting mandrel for rear front-axle carrier |
| 4 | Mounting mandrel for centring in the body. |
| 5 | Position of mounting mandrel on transmission cross member |
| Cayenne Diesel/Hybrid | |
| Cayenne/S/GTS/Turbo/Turbo S | |
| 6 | Position of mounting mandrel on transmission cross member |
| Cayenne S Diesel | |
| 7 | Bracket for wheel carrier |
| 8 | Mounting for lower wishbone |
| 9 | > VAS 6832/2 - Assembly Fixture Supplement Set - Cayenne |
| Arrows | Nuts and screws |
- Convert engine/transmission mounting.
- 1.1 Unscrew nuts -arrows - .
- 1.2 Remove nuts and screws.
- 1.3 Remove old cross member and replace it with new cross member -9- .
- 1.4 Screw in and tighten screws and nuts.