LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2017 >> Cayenne Turbo >> Repair and Diagnosis >> Engine Mechanical >> Starter >> 27 - Starter, Power Supply, Cruise Control (4.8L Turbo) -- 92A - Cayenne (92A) >> WM, 271219 Removing And Installing Battery Cover >> Removing And Installing Battery Cover

Removing And Installing Battery Cover

WARNING: Caustic fluids
  • Danger of chemical burns

    → Wear personal protective gear.

    → Ensure that there is good ventilation.

    → Avoid contact with caustic fluid.

    → If you do come into contact, wash off immediately with plenty of warm water and contact a doctor if necessary.

WARNING: Static battery charge
  • Battery can explode
  • Electrical discharges

    → Do not rub the battery with a dry cloth.

Information 

G16309826Courtesy of PORSCHE CARS NORTH AMERICA, INC.

Installation position of battery

Information 

Switch off all loads and remove the ignition key.

  1. When removing the carpeted floor for the first time, cut along the perforation using a carpet knife.
  2. Unscrew screw -1-  and remove air guide -2-  .
    G16309827Courtesy of PORSCHE CARS NORTH AMERICA, INC.

    Removing battery cover

  3. Open the tension hooks -arrows-  on the battery cover -3-  using a suitable tool.
  4. Remove battery cover -3-  .
  5. The battery cover -3-  is installed in reverse order to removal.
  6. Tighten screw -1-  . > Tightening torque 2 (1.5 ftlb.) Nm