LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2017 >> Cayenne Turbo >> Repair and Diagnosis >> Engine Mechanical >> Blowers, Superchargers & Turbochargers >> 21 - Exhaust Gas Turbocharging -- 92AAB1 Cayenne S >> WM, 213919 Removing And Installing Moulded Hose >> Removing Moulded Hose

Removing Moulded Hose

Information 

The procedure for removing and installing is described for one side as an example. The procedure for the other side is almost identical.

  1. Remove moulded hose -1-  .
    1. Release safety clip -arrow-  and pull moulded hose -1-  off the charge-air cooler -2-  .
    2. Loosen screw-type clamp -3-  and remove moulded hose -1-  from air box for the throttle valve -4-  .
G14802892Courtesy of PORSCHE CARS NORTH AMERICA, INC.
scientia non olet · About LEMON Manuals