Technical Values
| Location | Description | Type | Basic value | Tolerance 1 | Tolerance 2 |
|---|---|---|---|---|---|
| No. 2: Threaded connection securing anti-roll bar to suspension/stabilizer | M12 x 1.5 thread (always replace screws and lock nuts after removal) | Tightening torque | 100 Nm (74 ftlb.) | ||
| Threaded connection securing suspension/stabilizer to wheel carrier/shock absorber strut | M12 x 1.5 thread (always replace screws and lock nuts after removal) | Tightening torque | 90 Nm (67 ftlb.) | +90 angular degrees |