Coating On The Pccb Brake Discs (Possible Causes)
The coating on the PCCB brake discs arises as a result of a high load and high temperatures, for example on a racing circuit. Check the following in such cases:
Bores (perforations) in brake disc friction surface
- Ventilation (brake cooling): All components are present, secured correctly and undamaged.
- Brake pad quality: If the vehicle is used for race-track driving, use appropriate brake pads.
- The perforation bores
> Bores (perforations) in brake disc friction surface
in the brake discs must not be blocked. Unblock them if necessary.
> 465402 Checking rear PCCB brake disc (wear assessment) - section on "INFORMATION "
- In the event of brake pad wear, the brake discs can still be used provided the brake discs satisfy all wear criteria
> 465402 Checking rear PCCB brake disc (wear assessment) - section on "INFORMATION "
The perforation bores > Bores (perforations) in brake disc friction surface must not be blocked.