Preliminary Work

Raise the vehicle.

> 4X00IN LIFTING THE VEHICLE

Remove wheel. Use assembly aids (assembly pins) -1-  .

> 440519 REMOVING AND INSTALLING WHEEL

Courtesy of PORSCHE CARS NORTH AMERICA, INC.

Assembly aids (threaded bolts for fitting wheel)

Information 

• Do not open the brake system. 
• Do not loosen the brake hose from the brake calliper when loosening the brake calliper. 
• The core of the warning contact line must not be exposed! Worn insulation is not important! 
• If necessary, remove a little brake fluid from the reservoir by suction in order to prevent an overflow when the disc brake pads are pushed back. 

1. Partially remove brake calliper.

   > 474119 REMOVING AND INSTALLING REAR BRAKE CALLIPER