Removing Rear-View Mirror Housing (Lower Part)

Information 

• The number of fastening screws, fixing clips, plug connections, holders and trim panels can vary depending on equipment. 
• The illustrations for removing and installing the drive mechanism are shown only on one equipment variant and may differ from the actual equipment variant. 
• Some steps must be carried out automatically. 
• Some of the repair illustrations show only one side of the vehicle. 

1. Unscrew fastening screws -1-  .
2. Unclip area lighting -2-  from lower part of housing -3-  .
3. Guide out lower part of housing -3-  at the wire harness -4-  and remove lower part of housing -3-  .
   Fig 1: Identifying Lower Part Of Housing

   Courtesy of PORSCHE CARS NORTH AMERICA, INC.