Removing Left Engine Support
- Remove electric plug connection for engine speed sender -arrow-
from guide tube for oil dipstick and disconnect it.
Electric connector for engine speed sender
- Disconnect coolant hoses -1- and -2- at the oil cooler.
- Loosen engine support -1-
.
- Disconnect electric plug connection -2- on the oil pressure switch.
- Unscrew nut -3- and screws -arrows- (accessible from above).
Engine support at engine mount
- Remove engine support
- Unscrew oil filter cover -2- and collect emerging oil.
- Unscrew screws -arrows- and remove engine support with oil filter housing and oil cooler -3- .
Engine support