Installing Charge Air Cooler
- Install charge air cooler.
- Install pressure pipe.
- Install charge air line.
- Push charge air line -3-
onto the holder -4-
and slide it into the air box for throttle housing (Y-shaped pipe).
- Fit circlip -2- for holder.
- Tighten hose clamp -1- .
- Clip vacuum hose into the two clips under the charge air line.
- Right side only: Push hose -1- onto the connection piece for the charge air line -2- .
- Push charge air line -3-
onto the holder -4-
and slide it into the air box for throttle housing (Y-shaped pipe).