Assembly Overview Part 1 - Cooling System

Courtesy of PORSCHE CARS NORTH AMERICA, INC.

Assembly overview Part 1 - cooling system 

1. Coolant reservoir
2. Circulating pump
3. ATF preheater
4. Coolant temperature sensor
5. Temperature sensor for engine temperature control > Tightening torque 5 Nm  (3.5 ftlb.)
6. Coolant pump
7. Coolant control valve

Replace O-rings and seals.

Pull plug-in couplings to check that they are seated securely

Tightening torques: 

M6 screws: > Tightening torque 10 Nm  (7.5 ftlb.)

M8 screws: > Tightening Torque 20 Nm  (15 ftlb.)