Replacing Seal For Rear Panel

1. 1.1. Pull off seal at the side -4-  of the rear glass panel -2-  sideways.
2. 1.2. Pull off seal at the front -3-  of the rear glass panel -2-  in an upward direction.

Fig 1: Removing Seal For Rear Panel

Courtesy of PORSCHE CARS NORTH AMERICA, INC.

Information 

To make installation easier, the area should be moistened with a soapy solution.

1. 2.1. Press seal at the front -3-  into the front mounting from above and center it.
2. 2.2. Press seal at the side -4-  into the mounting on the glass panel.