LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2017 >> 718 Boxster Base, Standard Trans >> Repair and Diagnosis >> Engine Mechanical >> Blowers, Superchargers & Turbochargers >> 21 Exhaust Gas Turbocharging 2.0L -- 982 - BOXSTER/CAYMAN >> WM, 213919 - Removing And Installing Moulded Hose >> Installing Moulded Hose

Installing Moulded Hose

  1. Install moulded hose -1  - at the bottom.
    1. 1.1 Place moulded hose in installation position and secure screw-type clamps.

      > Tightening torque 5.5 Nm + 0.5 Nm 

    G14945176Courtesy of PORSCHE CARS NORTH AMERICA, INC.
  2. Install moulded hose -1  - at the top.
    1. 2.1 Place moulded hose -1  - in installation position and secure screw-type clamps -2  -.

      > Tightening torque 5.5 Nm + 0.5 Nm 

    G14945177Courtesy of PORSCHE CARS NORTH AMERICA, INC.
scientia non olet · About LEMON Manuals