LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2017 >> 718 Boxster Base, Standard Trans >> Repair and Diagnosis >> Drivelines & Axles >> Driveshaft & Universal Joints >> 42 Rear Wheel Suspension Drive Shaft 2.0L -- 982 - BOXSTER/CAYMAN >> WM, 429119 Removing And Installing Connecting Link For Anti-Roll Bar >> Removing And Installing Connecting Link For Anti-Roll Bar >> Installing Connecting Link For Anti-Roll Bar

Installing Connecting Link For Anti-Roll Bar

  1. Installation is performed in reverse order.
    1. 1.1  Tighten fastening nuts to the specified tightening torque.

      Connecting link to anti-roll bar -1-  : > Initial tightening 40 Nm (29.5 ftlb.)  > Final tightening + 30° 

      Connecting link to wheel bearing housing -2-  > Initial tightening 50 Nm (36.9 ftlb.)  > Final tightening + 180° 

    G14947129Courtesy of PORSCHE CARS NORTH AMERICA, INC.

    Mounting for connecting link

scientia non olet · About LEMON Manuals