LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2017 >> 718 Boxster Base, Standard Trans >> Repair and Diagnosis >> Drivelines & Axles >> Driveshaft & Universal Joints >> 42 Rear Wheel Suspension Drive Shaft 2.0L -- 982 - BOXSTER/CAYMAN >> WM, 423619 Removing And Installing Diagonal Arm >> Removing And Installing Diagonal Arm >> Replacing Diagonal Arm

Replacing Diagonal Arm

  1. Convert control arm spoiler to suit new diagonal arm.
    1. 1.1  Open retaining clip -1-  and remove control arm spoiler.
      G14947032Courtesy of PORSCHE CARS NORTH AMERICA, INC.

      Control arm spoiler mounting

      Information 

      Pay particular attention to the following when fitting the control arm spoiler:

      • Control arm spoiler must be fitted behind the retaining lugs on the diagonal control arm. 
      • Retaining clip must engage fully. 
    2. 1.2  Fit control arm spoiler on new diagonal arm.
scientia non olet · About LEMON Manuals