Installing Cover For Front Backrest
- Check clamps and clips -1-
and replace them if necessary.
Checking clamps and clips
- Pull backrest cover -1-
over the seat backrest -arrows-
and align with the contour of the padding.
Installing backrest cover
- Press plastic strip -2-
on the backrest cover -1-
into the clips -3-
(-arrows-
).
Securing backrest cover
- Press backrest cover -1-
into the cushion carrier -2-
from the rear -arrows-
and tap gently into place (plastic hammer).
Securing backrest cover on cushion carrier
- Press backrest cover -1-
into the side airbag frame -2-
using a plastic wedge -3-
.
Securing backrest cover on side airbag frame
- Engage backrest cover at the backrest adjustment control button -arrows-
.
Securing backrest cover on backrest adjustment frame
- Install front side airbag.
- Clip cover piping -1-
at the left and right in the locking lugs -2-
on the backrest frame.
Fastening cover piping
- Slide backrest cover -1-
on the cushion carrier -2-
at the bottom left and right, starting at the middle and moving to each side -arrows-
.
Securing backrest cover on bottom cushion carrier
- Fit clothes hook -1- above the cut-out and press it down until it locks with an audible click.
Installing clothes hook