LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2017 >> 718 Boxster Base, Automatic DCT Trans >> Repair and Diagnosis >> Brakes >> Mechanical - Hydraulic >> 46 Brakes - Brake Mechanism 2.0L -- 982 - BOXSTER/CAYMAN >> WM, 468519 Removing And Installing Spreader Device (Actuator) >> Installing Spreader Device (Actuator)

Installing Spreader Device (Actuator)

  1. If you intend to re-use the actuator:  Clean the actuator carefully without damaging the dust boots.
  2. If you intend to re-use the actuator:  Visually inspect the dust boots for cracks.
  3. Further installation is performed in reverse order to removal.
    1. 3.1  Tighten screws on actuator -Arrows-  : > initial tightening 10 Nm (7.4 ftlb.)  > Final tightening + 60 > 
      G14947332Courtesy of PORSCHE CARS NORTH AMERICA, INC.

      Mounting for actuator

    2. 3.2  Tighten screws on brake cover plate: >
scientia non olet · About LEMON Manuals