Subsequent Work

NOTIFICATION 

Risk of damage to cover if excessive heat is applied. 

• Creases in cover 

→ If creases have formed, only short partial warming with the hot-air gun is permissible.

→ The hot-air temperature of 50°C must always be observed.

1. If creases have formed, partially heat the cover with a hot-air gun and smooth out the cover using special tools.

   > 9747 - Wetting-off iron 

   > 9747/1 - Knurling iron 

   > 9747/2 - Bone burnisher 

   >V.A.G 1416 - Hot-Air Blower 

   Information 

   For vehicles without air-conditioned comfort seat.

2. Install cover for front middle backrest.

   742019 REMOVING AND INSTALLING COVER FOR FRONT MIDDLE BACKREST 

   Information 

   For vehicles with air-conditioned comfort seat.

3. Secure cover for front middle backrest correctly.

   > 742019 REMOVING AND INSTALLING COVER FOR FRONT MIDDLE BACKREST (AIR-CONDITIONED COMFORT SEAT) 

4. Install front seat.

> 720119 REMOVING AND INSTALLING FRONT SEAT