Replacing Gas-Discharge Headlight
- Unscrew the four fastening screws on the headlight cover and remove the headlight cover.
- Unplug connector on the gas-discharge headlight -Arrow-
.
- Release and open the retaining bracket -Arrow- .
- Pull out gas-discharge headlight.
- Install gas-discharge headlight.
- Close the retaining bracket and clip it into the two mounting points.
- Plug electric connector for the gas-discharge headlight in fully.
Vehicles with fan, continue with Step 8.
Vehicle without fan, continue with Step 9.
- Convert fan.
- 8.1 Loosen fan by turning it anti-clockwise from the old gas-discharge headlight and remove it.
- 8.2 Release and disconnect electric plug connection for fan.
- 8.3 Install fan on new gas-discharge headlight in reverse order.
- Fit headlight cover and secure with the four fastening screws.