Installing Tail Light
- Connect electric plug connection -arrow "A"-
until the lock engages securely.
- Pre-position the tail light -1-
so that the T-bolts run into the guide rails.
- Slide in tail light -1- until the catch -2- locks securely.
- Fit fastening screw -1-
for the tail light and tighten to > Tightening torque 2.0 Nm (1.5 ftlb.) +/- 0.2 Nm (0.1 ftlb.)
.
- Fit rubber stopper in the rear luggage compartment -arrow "A"-
.
- Fit rubber stopper -1- in the wheel housing -arrow "A"- .