Removing Control Unit For Distance Measuring Sensor

Fig 1: Identifying Installation Position Of Control Unit For Distance Measuring Sensor

Courtesy of PORSCHE CARS NORTH AMERICA, INC.

1. Switch off ignition and remove the remote control from the ignition lock.
2. Remove cover on sensor.
   Fig 2: Removing Sensor Cover

   Courtesy of PORSCHE CARS NORTH AMERICA, INC.
   1. 2.1. Release cover at the top.
   2. 2.2. Fold cover forwards and detach at the bottom holder.
   3. 2.3. Unclip and remove upper cover.
3. Release electric plug connection -a-  and disconnect connector from control unit for distance measuring sensor.
   Fig 3: Disconnecting Plug Connection

   Courtesy of PORSCHE CARS NORTH AMERICA, INC.
4. Unscrew and remove fastening screws -1-  from holder for control unit for distance measuring sensor.
   Fig 4: Removing Fastening Screws

   Courtesy of PORSCHE CARS NORTH AMERICA, INC.
5. Remove holder together with control unit for distance measuring sensor.