Preliminary Work
- Disconnect the battery. → 2X00IN WORK INSTRUCTIONS AFTER DISCONNECTING THE BATTERY .
- Remove right front wheel. → 440519 REMOVING AND INSTALLING WHEEL .
- Remove front wheel housing liner at the right. → 505619 REMOVING AND INSTALLING FRONT WHEEL HOUSING LINER .
- Remove cover for underbody protection. → 519219 REMOVING AND INSTALLING COVER FOR FRONT UNDERBODY .
- Remove right air cowl on air cleaner housing. → 242719 REMOVING AND INSTALLING AIR BOX FOR AIR CLEANER .
- Loosen drive belt. → 137819 REMOVING AND INSTALLING DRIVE BELT .
- Unscrew fastening screw -1- on the cable duct -2- on the cylinder head at the right. Unclip vacuum line -3- .
- Release electric plug connection -2- on oil pressure control valve -1- and disconnect it. Unclip fixing clip -3- .
- Remove pressure and suction hoses close to cylinders 1-3 → 214119 REMOVING AND INSTALLING PRESSURE PIPE
.
- 9.1. Remove pressure pipes at the top in front of the throttle valves.
- 9.2. Remove lower right pressure pipe between the charge-air cooler and turbocharger.
- 9.3. Remove lower right intake pipe in front of the turbocharger (pull off positive crankcase ventilation hose on the intake pipe first).