LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2016 >> Panamera Turbo >> Repair and Diagnosis >> Electrical >> Starter >> 27 - Starter, Power Supply, Cruise Control -- PANAMERA (970) >> WM 270519 Removing And Installing Battery Sensor (Except PANAMERA S Executive, PANAMERA 4 S Executive, PANAMERA Turbo Executive, PANAMERA GTS) >> Installing Battery Sensor

Installing Battery Sensor

  1. Connect ground strap to the ground point and secure with the fastening nut -2-  . Tightening torque 9.7 Nm (7.5 ftlb.) 
    Fig 1: Fitting Ground Strap
    G09806170Courtesy of PORSCHE CARS NORTH AMERICA, INC.
  2. Fit and secure battery sensor -1-  with terminal clamp on the battery. Tightening torque 6 Nm (4.5 ftlb.) +/-0.5 Nm (+/-0.5 ftlb.) 
    Fig 2: Securing Battery Sensor With Terminal Clamp On Battery
    G09806171Courtesy of PORSCHE CARS NORTH AMERICA, INC.
  3. Connect electric plug connection for battery sensor.
scientia non olet · About LEMON Manuals