LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2016 >> Panamera Turbo >> Repair and Diagnosis >> Collision >> Body Panels >> 51 - Body Center, Roof, Frame - PANAMERA (970) >> WM 519319 Removing And Installing Cover For Centre Underbody (Except PANAMERA S Executive, PANAMERA Executive, PANAMERA 4 S Executive, PANAMERA Turbo Executive, PANAMERA Turbo S Executive, PANAMERA GTS, PANAMERA 4S Sport Edition, PANAMERA 4 Executive) >> Removing And Installing Tunnel Cover >> Installing Tunnel Cover

Installing Tunnel Cover

  1. Position tunnel cover.
  2. Screw in fastening screws -1-  .
    Fig 1: Installing Tunnel Cover Fastening Screws
    G09809760Courtesy of PORSCHE CARS NORTH AMERICA, INC.
  3. Tighten fastening nuts -2-  .
    Fig 2: Tightening Tunnel Cover Fastening Nuts
    G09809761Courtesy of PORSCHE CARS NORTH AMERICA, INC.
  4. Tighten fastening screws -1-  to the specified tightening torque Tightening torque 2.8 Nm (2 ftlb.) +/- 0.5 Nm (+/-0.5 ftlb.)  until secure.
    Fig 3: Tightening Tunnel Cover Front Fastening Screws
    G09809762Courtesy of PORSCHE CARS NORTH AMERICA, INC.
scientia non olet · About LEMON Manuals