Removing And Installing Front Speed Sensor

1. Turn in steering as far as required to allow better access to the speed sensor.
   Fig 1: Identifying Installation Position Of Speed Sensor

   Courtesy of PORSCHE CARS NORTH AMERICA, INC.
2. Disconnect connector from speed sensor. -arrow- 
   Fig 2: Disconnecting Speed Sensor Connector

   Courtesy of PORSCHE CARS NORTH AMERICA, INC.
3. Loosen fastening screw and remove speed sensor.
   Fig 3: Identifying Speed Sensor Mounting

   Courtesy of PORSCHE CARS NORTH AMERICA, INC.

Information 

• The speed sensor must be inserted using Optitemp (Optitemp LG2, 25-ml spray can available under Part No. 000.043.204.21). 
• The bore for the speed sensor mounting must be free of dirt. 
• Use specified tightening torques. 

1. Position speed sensor in installation position and screw on securely.

   Speed sensor to wheel bearing housing:

2. Plug in connector.