Subsequent Work

Information 

Check the position of the steel flexi-pipes again following installation. Make sure that:

• The lines are not installed twisted (markings!) 
• The lines are not exposed to any mechanical strain from the outside while driving, i.e. they must not be overstrained or deformed. 
• The lines are not rubbing against other moving components. 
• The lines cannot become clamped. 

1. Install rear section of front wheel housing liner at the left. → Installing Rear Part Of Front Wheel Housing Liner
2. Install cover for front underbody. → Installing Cover For Front Underbody
3. Bleed the PDCC system. → 430307 BLEEDING PORSCHE DYNAMIC CHASSIS CONTROL (PDCC)