Battery Handling Instructions: Notes

Information 

• The tightening torque for the battery terminals is → Torque: 6 Nm (4.5 ftlb.)+/-0.5 Nm (+/-0.5 ftlb.)  .
• If the battery is reconnected, proceed according to →  2X00IN WORK INSTRUCTIONS AFTER DISCONNECTING THE BATTERY 

Information 

• Battery terminals do not need to be greased. 
• The battery terminal clamps should only be attached by hand - without excessive force - to prevent damage to the battery. 
• The tightening torque for the battery terminals is → Torque: 5 Nm (3.5 ftlb.)  .
• If the battery is reconnected, proceed according to →  2X00IN WORK INSTRUCTIONS AFTER DISCONNECTING THE BATTERY