Installing Actuator For Camshaft
Information
Tightening torques, tightening sequence and assembly overviews for the engine and transmission:
- Group 1: → 1X00IN TECHNICAL VALUES
- Group 2: → 2X00IN TECHNICAL VALUES
- Group 3: → 3X00IN TECHNICAL VALUES
- Installation is performed in reverse order. Pay particular attention to the following:
| Tightening sequence for central screw for camshaft controller | ||
|---|---|---|
| Result: | Cylinder bank: | Camshaft: |
| 1. | Bank 1, cylinders 1-3 | Exhaust |
| 2. | Bank 1, cylinders 1-3 | Intake |
| 3. | Bank 2, cylinders 4-6 | Intake |
| 4. | Bank 2, cylinders 4-6 | Exhaust |