LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2016 >> Panamera GTS >> Repair and Diagnosis >> Engine Mechanical >> Mechanical >> 15 - Engine - Cylinder Head, Valve Control -- PANAMERA (970) >> WM 158219 Removing And Installing Cylinder Head Cover (PANAMERA S, PANAMERA S Executive, PANAMERA 4S, PANAMERA 4 S Executive) >> Technical Values >> Tightening Specifications For Fuel Lines To High-Pressure Pump And Fuel Gallery

Tightening Specifications For Fuel Lines To High-Pressure Pump And Fuel Gallery

  1. Fit union nuts hand-tight.
  2. Screw in and align holder/clamp.
  3. Tighten union nuts to → Initial tightening: 20 Nm (15 ftlb.) 
  4. Tighten holder/clamp to → Tightening torque: 10 Nm (7.5 ftlb.)  .
  5. Tighten union nuts to → Final tightening: +35 Nm (+26 ftlb.)  until secure.
scientia non olet · About LEMON Manuals