Subsequent Work For Cylinders 4 - 6
- Install solenoid/hydraulic valve for camshaft controller.
→ 153719 REMOVING AND INSTALLING SOLENOID/HYDRAULIC VALVE FOR CAMSHAFT CONTROLLER
- Install ignition coils. → Installing Bar Ignition Modules
- Install high-pressure pump. → Installing High-Pressure Pump
- Install positive crankcase ventilation valve. → 105119 POSITIVE CRANKCASE VENTILATION VALVE
- Pull engine aside using special tool 9866. Support 9866
For better access to the fastening screws on the cylinder head cover.
- Install torque support. → Installing Torque Support
- Install cross panel. → Installing Cross Panel