Valve drive, cylinders 1-3
Courtesy of PORSCHE CARS NORTH AMERICA, INC.
- Outlet camshaft, cylinders 1-3/grease bearing surfaces (Shell Darina APC Grease 2)
- Intake camshaft, cylinders 1-3/grease bearing surfaces (Shell Darina APC Grease 2)
- Hydraulic valve for variable valve control
- Screw, BM5 x 12 → Tightening torque: 6 Nm (4.5 ftlb.)
- Switching tappet/coat with engine oil
- Bucket tappet/coat with engine oil
- Stopper 11.2
- Mounting saddle/grease bearing surfaces (Shell Darina APC Grease 2)
- Stopper 6.7
- Housing/grease bearing surfaces (Shell Darina APC Grease 2)
- Screw, BM6 x 70 → Tightening torque: 13 Nm (9.5 ftlb.)
- Phase sensor
- Aluminum screw
, M6 x 16/replace
→ Initial tightening: 4 Nm (3 ftlb.)
→ Final tightening: +60°
- Dowel sleeve
- Screw, M6 x 35 x 25 → Tightening torque: 13 Nm (9.5 ftlb.)
- Dowel sleeve