Technical Values
| Location | Description | Type | Basic value | Tolerance 1 | Tolerance 2 |
|---|---|---|---|---|---|
| Fastening screw securing drive sprocket for oil pump | Replace | Initial tightening | 30 Nm (22 ftlb.) | ||
| Fastening screw securing drive sprocket for oil pump | Final tightening | +90° | |||
| Fastening screw securing sprocket for balance shaft | Replace | Initial tightening | 15 Nm (11 ftlb.) | ||
| Fastening screw securing sprocket for balance shaft | Final tightening | +90° | |||
| Fastening screw for sprocket | Replace | Initial tightening | 10 Nm (7.5 ftlb.) | ||
| Fastening screw for sprocket | Final tightening | +45° |