Securing Timing-Case Cover

Secure aligned timing-case cover.
1. 1.1. Tighten screws to the specified tightening torque in the sequence -1 - 30- .
  
  Fig 1: Timing-Case Cover Tightening Sequence
  Courtesy of PORSCHE CARS NORTH AMERICA, INC.
  
  1-30 - Tightening sequence
  
  1-4 - Screw, M6 x 55
  
  5 + 6 - Screw, M8 x 55
  
  7-12 - Screw, M6 x 30
  
  13 + 14 - Screw, M6 x 55
  
  15-28 - Screw, M6 x 30
  
  29 - Screw, M6 x 55
  
  30 - Screw, M6 x 30
  
  -
  
  1-4 + 7-30 - Screw M6→ Initial tightening: 4 Nm (3 ftlb.) → Final tightening: +90°
  
  5 + 6 - Screw M8→ Initial tightening: 10 Nm (7.5 ftlb.) → Final tightening: +90°
Further installation is performed in reverse order.