Removing Lower Gusset Plate

Fig 1: Lower Gusset Plate Component Location

Courtesy of PORSCHE CARS NORTH AMERICA, INC.

Information 

Drill out spotwelds A  through two plate thicknesses.

1. Drill out spotwelds using spotweld drill  .
   Fig 2: Identifying Spotwelds On Lower Gusset Plate (1 Of 3)

   Courtesy of PORSCHE CARS NORTH AMERICA, INC.
   Fig 3: Identifying Spotwelds On Lower Gusset Plate (2 Of 3)

   Courtesy of PORSCHE CARS NORTH AMERICA, INC.
   Fig 4: Identifying Spotwelds On Lower Gusset Plate (3 Of 3)

   Courtesy of PORSCHE CARS NORTH AMERICA, INC.
2. Grind down MIG seams.
   Fig 5: Identifying MIG Seams On Lower Gusset Plate

   Courtesy of PORSCHE CARS NORTH AMERICA, INC.
3. Heat up connection areas using a hot-air gun.
   Fig 6: Identifying Connection Areas Of Lower Gusset Plate

   Courtesy of PORSCHE CARS NORTH AMERICA, INC.
4. Remove lower gusset plate.